home *** CD-ROM | disk | FTP | other *** search
- Path: f64.n1231!not-for-mail
- Newsgroups: comp.sys.amiga.hardware
- X-Comment-To: Jason Creager
- From: Fredrik Tempelman <Fredrik.Tempelman@p64.anet.canit.se>
- Date: Sun, 18 Feb 96 15:32:58 +0100
- Subject: Re: Maximum hard drive size for A4000 IDE
- Message-ID: <824679178@p64.f411.n201.z2.ftn>
- References: <3155667032@dialnet.net>
- Organization: Dark Dragons Dungeon, Stockholm, Sweden
- X-FTN-AREA: CANIT_CSA_HARDWARE
- X-FTN-MSGID: 2:201/411.64 31279b0a
- X-FTN-REPLY: dialnet.net bc17a858
- X-FTN-CHRS: IBMPC 2
- X-FTN-Tearline: Spot 1.3a #1023
- X-FTN-Origin: Dark Dragons Dungeon, Stockholm, Sweden (2:201/411.64)
- X-FTN-SEEN-BY: 201/411
- X-FTN-PATH: 1231/64 201/411
- X-FTN-PATH: 201/411
-
- In the message * Maximum hard drive size for A4000 IDE * Jason wrote:
-
- JC> I was just wonderin what is the largest size of hard drive recommended
- JC> for the stock IDE interface in an A4000. My dealer says to not go above
- JC> 1.0GB, but I've seen people using 1.2s and 1.4s and other sizes from
- JC> people's signatures on the group.
-
- 4Gb for drive and 2Gb for partions, limitations due to the OS. I use a Maxtor
- 71626 AP and HDToolBox recognize it as a 1553Mbyte HD, the manufactor claims of
- course a bit more (1626).
-
- /Fredrik/ /Tempelman/
-
-